|Home||» Products||» Gas Chlorinators||» Vacuum Controllers|
Aqua Vacuum Control
We take immense pleasure to introduce ourselves as one of the well established manufacturers and exporters of Aqua Vacuum Control. This equipment is widely used in varied water treatment plants and many other industries. Our entire assortment of Aqua Vacuum Control strictly adheres to all the international standard and norms. For the convenience of our clients, we also make available custom made models of these vacuum control equipments. Only quality tested raw materials and components are sourced for manufacturing these equipments.
Direct Cylinder Mounted Gas Chlorinator
Safe, Clean, Disinfected Water for Community Health For:
Water & Waster Treatment
Recirculating Water System
Control of Algae, Odor & Slime
The use of chlorine for sterilizing water is widely practised throughout the world. Chlorination is generally accepted as a very efficient and economical means of rendering water supplies safe to drink and giving protection against water-borne diseases.
The technique involves mixing chlorine gas and water to form hypochlorous acid. This kills the harmful bacteria and viruses.
AQUA-II instrument represents the latest advance in the design of solution (Vacuum) feed gas chlorination.
For safety reasons the system widely in use today for the purification of water supplies in a vacuum solution feed gas chlorinator. A vacuum chlorinator is much safer than a pressure chlorinator as any loss of vacuum causes the gas supply to be shut off instantly and automatically
The principle involves mixing an auxiliary supply of water with chlorine gas. The concentrated solution of chlorine is then injected in to the water
Operation in this wary, with the AQUA-II, provides a very economic means of purifying water suppliers while maintaining a very high degree of safety and reliability
AQUA-II incorporates many technological advanced designed to enhance long term reliability and achieve optimum performance with minimum supervision and maintenance
Method of Operation
The chlorine regulator can be mounted either on a wall or on top of the gas cylinder or container.
Correct operation depends on obtaining healthy vacuum from the ejector. Water flowing through the ejector creates a vacuum which opens the inlet valve to admit the gas in to the regulator. The ejector consists of a vacuum producing venturi and a spring loaded diaphragm check valve. The gas passes through the flow meter and the rate control valve and then to ejector where it is thoroughly mixed and dissolved in the water and carried to the application points as a solution
Any vacuum failure automatically shuts off the chlorine gas and ensures that no gas escapes in to the atmosphere
There is an automatic vent to atmosphere if pressure build up in the regulator
If the source of chlorine gas is exhausted or the gas line plugged and excess vacuum valve in the regulator closes to prevent any moisture being pulled back in to the regulator or the gas supply lines.
AQUA-II gas chlorinator and ejector are constructed fro PVC, VICTOM, Monel, PTFE, Extra duty Borosilicate Glass, Silver and Copper materials
For correct performance of our parts for a period of 12 months
We also supply Chlorine Cylinder 50 & 100 Kg. Cap. Chloroscope to detect chlorine percentage in water, safety
Saikh Farid Mohalla, Panigate,
Baroda - 390001