Aqua Vacuum Control

Direct Cylinder Mounted Gas Chlorinator

Safe, Clean, Disinfected Water for Community Health For:

• Water & Waster Treatment
• Industrial Wastes
• Food Processing
• Swimming Pools
• Water Conditioning
• Recirculating Water System
• Control of Algae, Odor & Slime

The use of chlorine for sterilizing water is widely practised throughout the world. Chlorination is generally accepted as a very efficient and economical means of rendering water supplies safe to drink and giving protection against water-borne diseases.

The technique involves mixing chlorine gas and water to form hypochlorous acid. This kills the harmful bacteria and viruses.

General Specification

AQUA-II instrument represents the latest advance in the design of solution (Vacuum) feed gas chlorination.

Vacuum Chlorinators

For safety reasons the system widely in use today for the purification of water supplies in a vacuum solution feed gas chlorinator. A vacuum chlorinator is much safer than a pressure chlorinator as any loss of vacuum causes the gas supply to be shut off instantly and automatically

The principle involves mixing an auxiliary supply of water with chlorine gas. The concentrated solution of chlorine is then injected in to the water

Operation in this wary, with the AQUA-II, provides a very economic means of purifying water suppliers while maintaining a very high degree of safety and reliability

Features

AQUA-II incorporates many technological advanced designed to enhance long term reliability and achieve optimum performance with minimum supervision and maintenance

Method of Operation

The chlorine regulator can be mounted either on a wall or on top of the gas cylinder or container.

Correct operation depends on obtaining healthy vacuum from the ejector. Water flowing through the ejector creates a vacuum which opens the inlet valve to admit the gas in to the regulator. The ejector consists of a vacuum producing venturi and a spring loaded diaphragm check valve. The gas passes through the flow meter and the rate control valve and then to ejector where it is thoroughly mixed and dissolved in the water and carried to the application points as a solution

Any vacuum failure automatically shuts off the chlorine gas and ensures that no gas escapes in to the atmosphere

There is an automatic vent to atmosphere if pressure build up in the regulator

If the source of chlorine gas is exhausted or the gas line plugged and excess vacuum valve in the regulator closes to prevent any moisture being pulled back in to the regulator or the gas supply lines.

AQUA-II gas chlorinator and ejector are constructed fro PVC, VICTOM, Monel, Teflon, Extra duty Borosilicate Glass, Silver and Copper materials

Guarantee

• For correct performance of our parts for a period of 12 months
• We also supply Chlorine Cylinder 50 & 100 Kg. Cap. Chloroscope to detect chlorine percentage in water, safety